Kuuskantääriku polt Din 6921, klass 8.8 täiskeermega tsingitud
| Toote nimi | HEX BOLT DIN 931/ISO4014 poolkeere |
| Standard | DIN,ASTM/ANSI JIS EN ISO,AS,GB |
| Hinne | Terase klass: DIN: Gr.4.6,4.8,5.6,5.8,8.8,10.9,12.9;SAE: Gr.2,5,8; ASTM: 307A,A325,A490, |
| Viimistlemine | Tsink (kollane, valge, sinine, must), humal tsingitud (HDG), must oksiid, Geomet, Dacroment, anodeerimine, nikeldatud, tsink-nikeldatud |
| Tootmisprotsess | M2-M24: külm konn, M24-M100 kuum sepistamine, Mehaaniline töötlemine ja CNC kohandatud kinnitusdetailide jaoks |
| Kohandatud toodete tarneaeg | 30-60 päeva, |
| Kruvikeere | M1.6 | M2 | M2.5 | M3 | (M3.5) | M4 | M5 | M6 | (M7) | M8 | M10 | M12 | ||
| P | Pitch | 0,35 | 0.4 | 0,45 | 0.5 | 0.6 | 0.7 | 0.8 | 1 | 1 | 1.25 | 1.5 | 1.75 | |
| b | L≤125 | 9 | 10 | 11 | 12 | 13 | 14 | 16 | 18 | 20 | 22 | 26 | 30 | |
| 125＜L≤200 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 26 | 28 | 32 | 36 | ||
| L = 200 | 28 | 29 | 30 | 31 | 32 | 33 | 35 | 37 | 39 | 41 | 45 | 49 | ||
| c | max | 0,25 | 0,25 | 0,25 | 0.4 | 0.4 | 0.4 | 0.5 | 0.5 | 0.6 | 0.6 | 0.6 | 0.6 | |
| min | 0.1 | 0.1 | 0.1 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | ||
| da | max | 2 | 2.6 | 3.1 | 3.6 | 4.1 | 4.7 | 5.7 | 6.8 | 7.8 | 9.2 | 11.2 | 13.7 | |
| ds | max = nimisuurus | 1.6 | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | 7 | 8 | 10 | 12 | |
| Hinne A | min | 1.46 | 1.86 | 2.36 | 2.86 | 3.32 | 3.82 | 4.82 | 5.82 | 6.78 | 7.78 | 9.78 | 11.73 | |
| Hinne B | min | 1.35 | 1.75 | 2.25 | 2.75 | 3.2 | 3.7 | 4.7 | 5.7 | 6.64 | 7.64 | 9.64 | 11.57 | |
| dw | Hinne A | min | 2.54 | 3.34 | 4.34 | 4.84 | 5.34 | 6.2 | 7.2 | 8.88 | 9.63 | 11.63 | 14.63 | 16.63 |
| Hinne B | min | 2.42 | 3.22 | 4.22 | 4.72 | 5.22 | 6.06 | 7.06 | 8.74 | 9.47 | 11.47 | 14.47 | 16.47 | |
| e | Hinne A | min | 3.41 | 4.32 | 5.45 | 6.01 | 6.58 | 7.66 | 8.79 | 11.05 | 12.12 | 14.38 | 17.77 | 20.03 |
| Hinne B | min | 3.28 | 4.18 | 5.31 | 5.88 | 6.44 | 7.5 | 8.63 | 10.89 | 11.94 | 14.2 | 17.59 | 19.85 | |
| L1 | max | 0.6 | 0.8 | 1 | 1 | 1 | 1.2 | 1.2 | 1.4 | 1.4 | 2 | 2 | 3 | |
| k | Nominaalsuurus | 1.1 | 1.4 | 1.7 | 2 | 2.4 | 2.8 | 3.5 | 4 | 4.8 | 5.3 | 6.4 | 7.5 | |
| Hinne A | max | 1.225 | 1.525 | 1.825 | 2.125 | 2.525 | 2.925 | 3.65 | 4.15 | 4.95 | 5.45 | 6.58 | 7.68 | |
| min | 0,975 | 1.275 | 1,575 | 1,875 | 2.275 | 2,675 | 3.35 | 3.85 | 4.65 | 5.15 | 6.22 | 7.32 | ||
| Hinne B | max | 1.3 | 1.6 | 1.9 | 2.2 | 2.6 | 3 | 3.74 | 4.24 | 5.04 | 5.54 | 6.69 | 7.79 | |
| min | 0.9 | 1.2 | 1.5 | 1.8 | 2.2 | 2.6 | 3.26 | 3.76 | 4.56 | 5.06 | 6.11 | 7.21 | ||
| k1 | Hinne A | min | 0,68 | 0,89 | 1.1 | 1.31 | 1.59 | 1.87 | 2.35 | 2.7 | 3.26 | 3.61 | 4.35 | 5.12 |
| Hinne B | min | 0,63 | 0,84 | 1.05 | 1.26 | 1.54 | 1.82 | 2.28 | 2.63 | 3.19 | 3.54 | 4.28 | 5.05 | |
| r | min | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.2 | 0.2 | 0,25 | 0,25 | 0.4 | 0.4 | 0.6 | |
| s | max = nimisuurus | 3.2 | 4 | 5 | 5.5 | 6 | 7 | 8 | 10 | 11 | 13 | 16 | 18 | |
| Hinne A | min | 3.02 | 3.82 | 4.82 | 5.32 | 5.82 | 6.78 | 7.78 | 9.78 | 10.73 | 12.73 | 15.73 | 17.73 | |
| Hinne B | min | 2.9 | 3.7 | 4.7 | 5.2 | 5.7 | 6.64 | 7.64 | 9.64 | 10.57 | 12.57 | 15.57 | 17.57 | |
| Keerme pikkus b | - | - | - | - | - | - | - | - | - | - | - | - | ||
| Kruvikeere | (M14) | M16 | (M18) | M20 | (M22) | M24 | (M27) | M30 | (M33) | M36 | (M39) | M42 | ||
| P | Pitch | 2 | 2 | 2.5 | 2.5 | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | |
| b | L≤125 | 34 | 38 | 42 | 46 | 50 | 54 | 60 | 66 | 72 | - | - | - | |
| 125＜L≤200 | 40 | 44 | 48 | 52 | 56 | 60 | 66 | 72 | 78 | 84 | 90 | 96 | ||
| L = 200 | 53 | 57 | 61 | 65 | 69 | 73 | 79 | 85 | 91 | 97 | 103 | 109 | ||
| c | max | 0.6 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 1 | 1 | |
| min | 0,15 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.3 | 0.3 | ||
| da | max | 15.7 | 17.7 | 20.2 | 22.4 | 24.4 | 26.4 | 30.4 | 33.4 | 36.4 | 39.4 | 42.4 | 45.6 | |
| ds | max = nimisuurus | 14 | 16 | 18 | 20 | 22 | 24 | 27 | 30 | 33 | 36 | 39 | 42 | |
| Hinne A | min | 13.73 | 15.73 | 17.73 | 19.67 | 21.67 | 23.67 | - | - | - | - | - | - | |
| Hinne B | min | 13.57 | 15.57 | 17.57 | 19.48 | 21.48 | 23.48 | 26.48 | 29.48 | 32.38 | 35.38 | 38.38 | 41.38 | |
| dw | Hinne A | min | 19.64 | 22.49 | 25.34 | 28.19 | 31.71 | 33.61 | - | - | - | - | - | - |
| Hinne B | min | 19.15 | 22 | 24.85 | 27.7 | 31.35 | 33.25 | 38 | 42,75 | 46,55 | 51.11 | 55,86 | 59,95 | |
| e | Hinne A | min | 23.36 | 26.75 | 30.14 | 33.53 | 37,72 | 39.98 | - | - | - | - | - | - |
| Hinne B | min | 22.78 | 26.17 | 29.56 | 32.95 | 37.29 | 39.55 | 45.2 | 50,85 | 55.37 | 60,79 | 66.44 | 71.3 | |
| L1 | max | 3 | 3 | 3 | 4 | 4 | 4 | 6 | 6 | 6 | 6 | 6 | 8 | |
| k | Nominaalsuurus | 8.8 | 10 | 11.5 | 12.5 | 14 | 15 | 17 | 18.7 | 21 | 22.5 | 25 | 26 | |
| Hinne A | max | 8.98 | 10.18 | 11.715 | 12.715 | 14.215 | 15.215 | - | - | - | - | - | - | |
| min | 8.62 | 9.82 | 11.285 | 12.285 | 13,785 | 14,785 | - | - | - | - | - | - | ||
| Hinne B | max | 9.09 | 10.29 | 11.85 | 12.85 | 14.35 | 15.35 | 17.35 | 19.12 | 21.42 | 22.92 | 25.42 | 26.42 | |
| min | 8.51 | 9.71 | 11.15 | 12.15 | 13.65 | 14.65 | 16.65 | 18.28 | 20.58 | 22.08 | 24.58 | 25.58 | ||
| k1 | Hinne A | min | 6.03 | 6.87 | 7.9 | 8.6 | 9.65 | 10.35 | - | - | - | - | - | - |
| Hinne B | min | 5.96 | 6.8 | 7.81 | 8.51 | 9.56 | 10.26 | 11.66 | 12.8 | 14.41 | 15.46 | 17.21 | 17.91 | |
| r | min | 0.6 | 0.6 | 0.6 | 0.8 | 0.8 | 0.8 | 1 | 1 | 1 | 1 | 1 | 1.2 | |
| s | max = nimisuurus | 21 | 24 | 27 | 30 | 34 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | |
| Hinne A | min | 20.67 | 23.67 | 26.67 | 29.67 | 33.38 | 35.38 | - | - | - | - | - | - | |
| Hinne B | min | 20.16 | 23.16 | 26.16 | 29.16 | 33 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | |
| Keerme pikkus b | - | - | - | - | - | - | - | - | - | - |
|
| ||
| Kruvikeere | (M45) | M48 | (M52) | M56 | (M60) | M64 |
|
|
|
|
|
| ||
| P | Pitch | 4.5 | 5 | 5 | 5.5 | 5.5 | 6 |
|
|
|
|
|
| |
| b | L≤125 | - | - | - | - | - | - |
|
|
|
|
|
| |
| 125＜L≤200 | 102 | 108 | 116 | - | - | - |
|
|
|
|
|
| ||
| L = 200 | 115 | 121 | 129 | 137 | 145 | 153 |
|
|
|
|
|
| ||
| c | max | 1 | 1 | 1 | 1 | 1 | 1 |
|
|
|
|
|
| |
| min | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 |
|
|
|
|
|
| ||
| da | max | 48.6 | 52.6 | 56.6 | 63 | 67 | 71 |
|
|
|
|
|
| |
| ds | max = nimisuurus | 45 | 48 | 52 | 56 | 60 | 64 |
|
|
|
|
|
| |
| Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
| |
| Hinne B | min | 44.38 | 47.38 | 51.26 | 55.26 | 59.26 | 63.26 |
|
|
|
|
|
| |
| dw | Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Hinne B | min | 64.7 | 69,45 | 74.2 | 78,66 | 83,41 | 88.16 |
|
|
|
|
|
| |
| e | Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Hinne B | min | 76,95 | 82.6 | 88,25 | 93,56 | 99.21 | 104,86 |
|
|
|
|
|
| |
| L1 | max | 8 | 10 | 10 | 12 | 12 | 13 |
|
|
|
|
|
| |
| k | Nominaalsuurus | 28 | 30 | 33 | 35 | 38 | 40 |
|
|
|
|
|
| |
| Hinne A | max | - | - | - | - | - | - |
|
|
|
|
|
| |
| min | - | - | - | - | - | - |
|
|
|
|
|
| ||
| Hinne B | max | 28.42 | 30.42 | 33.5 | 35.5 | 38.5 | 40.5 |
|
|
|
|
|
| |
| min | 27.58 | 29.58 | 32.5 | 34.5 | 37.5 | 39.5 |
|
|
|
|
|
| ||
| k1 | Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Hinne B | min | 19.31 | 20.71 | 22.75 | 24.15 | 26.25 | 27.65 |
|
|
|
|
|
| |
| r | min | 1.2 | 1.6 | 1.6 | 2 | 2 | 2 |
|
|
|
|
|
| |
| s | max = nimisuurus | 70 | 75 | 80 | 85 | 90 | 95 |
|
|
|
|
|
| |
| Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
| |
| Hinne B | min | 68.1 | 73.1 | 78.1 | 82,8 | 87,8 | 92,8 |
|
|
|
|
|
| |
| Keerme pikkus b | - | - | - | - | - | - |
|
|
|
|
| |||
Omadused ja eelised
Flange Bolt Din 6921 on kvaliteetne kinnitusvahend, mis on loodud kahe objekti vahel tugeva ja usaldusväärse ühenduse loomiseks.Poldil on äärikuga pea, mis jaotab koormussurve suuremale pinnale, vähendades kahjustuste või deformatsiooni tõenäosust.See disain muudab poldi ka sobivaks kasutamiseks rakendustes, mis nõuavad mõõdukat suure pöördemomendiga rakendusi.
Kvaliteetsetest materjalidest valmistatud äärikupolt Din 6921 on väga vastupidav korrosioonile, hõõrdumisele ja muudele kulumisvormidele.See on saadaval paljudes suurustes, mis võimaldab sellel ideaalselt sobida erinevat tüüpi koostude, masinate ja seadmetega.
Polti on ka lihtne paigaldada ja see nõuab minimaalset hooldust, mistõttu on see ideaalne valik rasketeks töödeks.Selle suurepärane tugevus ja vastupidavus muudavad selle sobivaks kasutamiseks erinevates tööstusharudes, sealhulgas ehituses, tootmises ja autotööstuses.
Kokkuvõtteks võib öelda, et Flange Bolt Din 6921 on mitmekülgne kinnitus, mis pakub erakordset jõudlust ja töökindlust.See on oluline komponent igas koostu või masinas, mis nõuab vastupidavaid ja turvalisi ühendusi.Olenemata sellest, kas vajate seda lihtsate isetegemisprojektide või suuremahuliste tööstuslike operatsioonide jaoks, on see polt suurepärane valik kõigi teie kinnitusvajaduste jaoks.
