Kuuskantpolt Din 931 / iso4014 933 / iso4017, klass 10.9
| Toote nimi | HEX BOLT DIN 931/ISO4014 poolkeere |
| Standard | DIN,ASTM/ANSI JIS EN ISO,AS,GB |
| Hinne | Terase klass: DIN: Gr.4.6,4.8,5.6,5.8,8.8,10.9,12.9;SAE: Gr.2,5,8; ASTM: 307A,A325,A490, |
| Viimistlemine | Tsink (kollane, valge, sinine, must), humal tsingitud (HDG), must oksiid, Geomet, Dacroment, anodeerimine, nikeldatud, tsink-nikeldatud |
| Tootmisprotsess | M2-M24: külm konn, M24-M100 kuum sepistamine, Mehaaniline töötlemine ja CNC kohandatud kinnitusdetailide jaoks |
| Kohandatud toodete tarneaeg | 30-60 päeva, |
| Kruvikeere | M1.6 | M2 | M2.5 | M3 | (M3.5) | M4 | M5 | M6 | (M7) | M8 | M10 | M12 | ||
| P | Pitch | 0,35 | 0.4 | 0,45 | 0.5 | 0.6 | 0.7 | 0.8 | 1 | 1 | 1.25 | 1.5 | 1.75 | |
| b | L≤125 | 9 | 10 | 11 | 12 | 13 | 14 | 16 | 18 | 20 | 22 | 26 | 30 | |
| 125＜L≤200 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 26 | 28 | 32 | 36 | ||
| L = 200 | 28 | 29 | 30 | 31 | 32 | 33 | 35 | 37 | 39 | 41 | 45 | 49 | ||
| c | max | 0,25 | 0,25 | 0,25 | 0.4 | 0.4 | 0.4 | 0.5 | 0.5 | 0.6 | 0.6 | 0.6 | 0.6 | |
| min | 0.1 | 0.1 | 0.1 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | ||
| da | max | 2 | 2.6 | 3.1 | 3.6 | 4.1 | 4.7 | 5.7 | 6.8 | 7.8 | 9.2 | 11.2 | 13.7 | |
| ds | max = nimisuurus | 1.6 | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | 7 | 8 | 10 | 12 | |
| Hinne A | min | 1.46 | 1.86 | 2.36 | 2.86 | 3.32 | 3.82 | 4.82 | 5.82 | 6.78 | 7.78 | 9.78 | 11.73 | |
| Hinne B | min | 1.35 | 1.75 | 2.25 | 2.75 | 3.2 | 3.7 | 4.7 | 5.7 | 6.64 | 7.64 | 9.64 | 11.57 | |
| dw | Hinne A | min | 2.54 | 3.34 | 4.34 | 4.84 | 5.34 | 6.2 | 7.2 | 8.88 | 9.63 | 11.63 | 14.63 | 16.63 |
| Hinne B | min | 2.42 | 3.22 | 4.22 | 4.72 | 5.22 | 6.06 | 7.06 | 8.74 | 9.47 | 11.47 | 14.47 | 16.47 | |
| e | Hinne A | min | 3.41 | 4.32 | 5.45 | 6.01 | 6.58 | 7.66 | 8.79 | 11.05 | 12.12 | 14.38 | 17.77 | 20.03 |
| Hinne B | min | 3.28 | 4.18 | 5.31 | 5.88 | 6.44 | 7.5 | 8.63 | 10.89 | 11.94 | 14.2 | 17.59 | 19.85 | |
| L1 | max | 0.6 | 0.8 | 1 | 1 | 1 | 1.2 | 1.2 | 1.4 | 1.4 | 2 | 2 | 3 | |
| k | Nominaalsuurus | 1.1 | 1.4 | 1.7 | 2 | 2.4 | 2.8 | 3.5 | 4 | 4.8 | 5.3 | 6.4 | 7.5 | |
| Hinne A | max | 1.225 | 1.525 | 1.825 | 2.125 | 2.525 | 2.925 | 3.65 | 4.15 | 4.95 | 5.45 | 6.58 | 7.68 | |
| min | 0,975 | 1.275 | 1,575 | 1,875 | 2.275 | 2,675 | 3.35 | 3.85 | 4.65 | 5.15 | 6.22 | 7.32 | ||
| Hinne B | max | 1.3 | 1.6 | 1.9 | 2.2 | 2.6 | 3 | 3.74 | 4.24 | 5.04 | 5.54 | 6.69 | 7.79 | |
| min | 0.9 | 1.2 | 1.5 | 1.8 | 2.2 | 2.6 | 3.26 | 3.76 | 4.56 | 5.06 | 6.11 | 7.21 | ||
| k1 | Hinne A | min | 0,68 | 0,89 | 1.1 | 1.31 | 1.59 | 1.87 | 2.35 | 2.7 | 3.26 | 3.61 | 4.35 | 5.12 |
| Hinne B | min | 0,63 | 0,84 | 1.05 | 1.26 | 1.54 | 1.82 | 2.28 | 2.63 | 3.19 | 3.54 | 4.28 | 5.05 | |
| r | min | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.2 | 0.2 | 0,25 | 0,25 | 0.4 | 0.4 | 0.6 | |
| s | max = nimisuurus | 3.2 | 4 | 5 | 5.5 | 6 | 7 | 8 | 10 | 11 | 13 | 16 | 18 | |
| Hinne A | min | 3.02 | 3.82 | 4.82 | 5.32 | 5.82 | 6.78 | 7.78 | 9.78 | 10.73 | 12.73 | 15.73 | 17.73 | |
| Hinne B | min | 2.9 | 3.7 | 4.7 | 5.2 | 5.7 | 6.64 | 7.64 | 9.64 | 10.57 | 12.57 | 15.57 | 17.57 | |
| Keerme pikkus b | - | - | - | - | - | - | - | - | - | - | - | - | ||
| Kruvikeere | (M14) | M16 | (M18) | M20 | (M22) | M24 | (M27) | M30 | (M33) | M36 | (M39) | M42 | ||
| P | Pitch | 2 | 2 | 2.5 | 2.5 | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | |
| b | L≤125 | 34 | 38 | 42 | 46 | 50 | 54 | 60 | 66 | 72 | - | - | - | |
| 125＜L≤200 | 40 | 44 | 48 | 52 | 56 | 60 | 66 | 72 | 78 | 84 | 90 | 96 | ||
| L = 200 | 53 | 57 | 61 | 65 | 69 | 73 | 79 | 85 | 91 | 97 | 103 | 109 | ||
| c | max | 0.6 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 1 | 1 | |
| min | 0,15 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.3 | 0.3 | ||
| da | max | 15.7 | 17.7 | 20.2 | 22.4 | 24.4 | 26.4 | 30.4 | 33.4 | 36.4 | 39.4 | 42.4 | 45.6 | |
| ds | max = nimisuurus | 14 | 16 | 18 | 20 | 22 | 24 | 27 | 30 | 33 | 36 | 39 | 42 | |
| Hinne A | min | 13.73 | 15.73 | 17.73 | 19.67 | 21.67 | 23.67 | - | - | - | - | - | - | |
| Hinne B | min | 13.57 | 15.57 | 17.57 | 19.48 | 21.48 | 23.48 | 26.48 | 29.48 | 32.38 | 35.38 | 38.38 | 41.38 | |
| dw | Hinne A | min | 19.64 | 22.49 | 25.34 | 28.19 | 31.71 | 33.61 | - | - | - | - | - | - |
| Hinne B | min | 19.15 | 22 | 24.85 | 27.7 | 31.35 | 33.25 | 38 | 42,75 | 46,55 | 51.11 | 55,86 | 59,95 | |
| e | Hinne A | min | 23.36 | 26.75 | 30.14 | 33.53 | 37,72 | 39.98 | - | - | - | - | - | - |
| Hinne B | min | 22.78 | 26.17 | 29.56 | 32.95 | 37.29 | 39.55 | 45.2 | 50,85 | 55.37 | 60,79 | 66.44 | 71.3 | |
| L1 | max | 3 | 3 | 3 | 4 | 4 | 4 | 6 | 6 | 6 | 6 | 6 | 8 | |
| k | Nominaalsuurus | 8.8 | 10 | 11.5 | 12.5 | 14 | 15 | 17 | 18.7 | 21 | 22.5 | 25 | 26 | |
| Hinne A | max | 8.98 | 10.18 | 11.715 | 12.715 | 14.215 | 15.215 | - | - | - | - | - | - | |
| min | 8.62 | 9.82 | 11.285 | 12.285 | 13,785 | 14,785 | - | - | - | - | - | - | ||
| Hinne B | max | 9.09 | 10.29 | 11.85 | 12.85 | 14.35 | 15.35 | 17.35 | 19.12 | 21.42 | 22.92 | 25.42 | 26.42 | |
| min | 8.51 | 9.71 | 11.15 | 12.15 | 13.65 | 14.65 | 16.65 | 18.28 | 20.58 | 22.08 | 24.58 | 25.58 | ||
| k1 | Hinne A | min | 6.03 | 6.87 | 7.9 | 8.6 | 9.65 | 10.35 | - | - | - | - | - | - |
| Hinne B | min | 5.96 | 6.8 | 7.81 | 8.51 | 9.56 | 10.26 | 11.66 | 12.8 | 14.41 | 15.46 | 17.21 | 17.91 | |
| r | min | 0.6 | 0.6 | 0.6 | 0.8 | 0.8 | 0.8 | 1 | 1 | 1 | 1 | 1 | 1.2 | |
| s | max = nimisuurus | 21 | 24 | 27 | 30 | 34 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | |
| Hinne A | min | 20.67 | 23.67 | 26.67 | 29.67 | 33.38 | 35.38 | - | - | - | - | - | - | |
| Hinne B | min | 20.16 | 23.16 | 26.16 | 29.16 | 33 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | |
| Keerme pikkus b | - | - | - | - | - | - | - | - | - | - |
|
| ||
| Kruvikeere | (M45) | M48 | (M52) | M56 | (M60) | M64 |
|
|
|
|
|
| ||
| P | Pitch | 4.5 | 5 | 5 | 5.5 | 5.5 | 6 |
|
|
|
|
|
| |
| b | L≤125 | - | - | - | - | - | - |
|
|
|
|
|
| |
| 125＜L≤200 | 102 | 108 | 116 | - | - | - |
|
|
|
|
|
| ||
| L = 200 | 115 | 121 | 129 | 137 | 145 | 153 |
|
|
|
|
|
| ||
| c | max | 1 | 1 | 1 | 1 | 1 | 1 |
|
|
|
|
|
| |
| min | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 |
|
|
|
|
|
| ||
| da | max | 48.6 | 52.6 | 56.6 | 63 | 67 | 71 |
|
|
|
|
|
| |
| ds | max = nimisuurus | 45 | 48 | 52 | 56 | 60 | 64 |
|
|
|
|
|
| |
| Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
| |
| Hinne B | min | 44.38 | 47.38 | 51.26 | 55.26 | 59.26 | 63.26 |
|
|
|
|
|
| |
| dw | Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Hinne B | min | 64.7 | 69,45 | 74.2 | 78,66 | 83,41 | 88.16 |
|
|
|
|
|
| |
| e | Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Hinne B | min | 76,95 | 82.6 | 88,25 | 93,56 | 99.21 | 104,86 |
|
|
|
|
|
| |
| L1 | max | 8 | 10 | 10 | 12 | 12 | 13 |
|
|
|
|
|
| |
| k | Nominaalsuurus | 28 | 30 | 33 | 35 | 38 | 40 |
|
|
|
|
|
| |
| Hinne A | max | - | - | - | - | - | - |
|
|
|
|
|
| |
| min | - | - | - | - | - | - |
|
|
|
|
|
| ||
| Hinne B | max | 28.42 | 30.42 | 33.5 | 35.5 | 38.5 | 40.5 |
|
|
|
|
|
| |
| min | 27.58 | 29.58 | 32.5 | 34.5 | 37.5 | 39.5 |
|
|
|
|
|
| ||
| k1 | Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Hinne B | min | 19.31 | 20.71 | 22.75 | 24.15 | 26.25 | 27.65 |
|
|
|
|
|
| |
| r | min | 1.2 | 1.6 | 1.6 | 2 | 2 | 2 |
|
|
|
|
|
| |
| s | max = nimisuurus | 70 | 75 | 80 | 85 | 90 | 95 |
|
|
|
|
|
| |
| Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
| |
| Hinne B | min | 68.1 | 73.1 | 78.1 | 82,8 | 87,8 | 92,8 |
|
|
|
|
|
| |
| Keerme pikkus b | - | - | - | - | - | - |
|
|
|
|
| |||
Omadused ja eelised
Kuuskantpolt Din 931 / iso4014 933 / iso4017 Grade10.9 on kvaliteetne toode, mis on loodud pakkuma tipptasemel jõudlust.Selle 10,9 klass kinnitab selle tugevust, mistõttu on see tööstuslikes rakendustes väga soovitatav.Sellel kuuskantpoldi mudelil on kolm erinevat valikut, mis vastavad erinevatele nõuetele, sealhulgas Iso4014 933, Iso4017 ja Din 931.
Selle kuuskantpoldi 10,9 klassi tõmbetugevus on 1000 N/mm² ja voolavuspinge 900 N/mm².Selle kõrge tugevusomadused muudavad selle ideaalseks rakenduste jaoks, mis nõuavad suurt kandevõimet või kõrge temperatuuriga kokkupuudet, näiteks auto- ja naftakeemiatööstuses.
See kuuskantpoldi mudel on toodetud vastama Din 931, Iso4014 933 ja Iso4017 kvaliteedistandarditele.See tähendab, et see läbib range kvaliteedikontrolli tagamaks, et see vastab nendes standardites sätestatud rangetele spetsifikatsioonidele.Lisaks läbib see kõvenemisprotsessi, et parandada selle tugevusomadusi, et saavutada parem jõudlus.
Kuuskantpolt Din 931 / iso4014 933 / iso4017 Grade10.9 on valmistatud kvaliteetsetest materjalidest, mis tagavad selle vastupidavuse korrosioonile, oksüdatsioonile ja kulumisele.Selle struktuurne terviklikkus on selline, et see talub pidevat kasutamist ja kokkupuudet karmide keskkonnatingimustega, ilma et see kahjustaks.
Kokkuvõtteks võib öelda, et kuuskantpolt Din 931 / iso4014 933 / iso4017 Grade10.9 on vastupidav ja töökindel toode, mis on loodud spetsiaalselt tööstuslikuks kasutamiseks.Selle klassifikatsioon 10,9 koos kvaliteedistandardite järgimisega teeb sellest suure jõudlusega poldi, millel on suurepärased tugevusomadused.Selle vastupidavus ja vastupidavus karmidele keskkonnatingimustele muudavad selle suurepäraseks investeeringuks mis tahes tööstuslikuks rakenduseks.
