Kuuskantpolt Din 931 / ISO4014 CL 8.8
| Toote nimi | HEX BOLT DIN 931/ISO4014 poolkeere |
| Standard | DIN,ASTM/ANSI JIS EN ISO,AS,GB |
| Hinne | Terase klass: DIN: Gr.4.6,4.8,5.6,5.8,8.8,10.9,12.9;SAE: Gr.2,5,8; ASTM: 307A,A325,A490, |
| Viimistlemine | Tsink (kollane, valge, sinine, must), humal tsingitud (HDG), must oksiid, Geomet, Dacroment, anodeerimine, nikeldatud, tsink-nikeldatud |
| Tootmisprotsess | M2-M24: külm konn, M24-M100 kuum sepistamine, Mehaaniline töötlemine ja CNC kohandatud kinnitusdetailide jaoks |
| Kohandatud toodete tarneaeg | 30-60 päeva, |
| Kruvikeere | M1.6 | M2 | M2.5 | M3 | (M3.5) | M4 | M5 | M6 | (M7) | M8 | M10 | M12 | ||
| P | Pitch | 0,35 | 0.4 | 0,45 | 0.5 | 0.6 | 0.7 | 0.8 | 1 | 1 | 1.25 | 1.5 | 1.75 | |
| b | L≤125 | 9 | 10 | 11 | 12 | 13 | 14 | 16 | 18 | 20 | 22 | 26 | 30 | |
| 125＜L≤200 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 26 | 28 | 32 | 36 | ||
| L = 200 | 28 | 29 | 30 | 31 | 32 | 33 | 35 | 37 | 39 | 41 | 45 | 49 | ||
| c | max | 0,25 | 0,25 | 0,25 | 0.4 | 0.4 | 0.4 | 0.5 | 0.5 | 0.6 | 0.6 | 0.6 | 0.6 | |
| min | 0.1 | 0.1 | 0.1 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | ||
| da | max | 2 | 2.6 | 3.1 | 3.6 | 4.1 | 4.7 | 5.7 | 6.8 | 7.8 | 9.2 | 11.2 | 13.7 | |
| ds | max = nimisuurus | 1.6 | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | 7 | 8 | 10 | 12 | |
| Hinne A | min | 1.46 | 1.86 | 2.36 | 2.86 | 3.32 | 3.82 | 4.82 | 5.82 | 6.78 | 7.78 | 9.78 | 11.73 | |
| Hinne B | min | 1.35 | 1.75 | 2.25 | 2.75 | 3.2 | 3.7 | 4.7 | 5.7 | 6.64 | 7.64 | 9.64 | 11.57 | |
| dw | Hinne A | min | 2.54 | 3.34 | 4.34 | 4.84 | 5.34 | 6.2 | 7.2 | 8.88 | 9.63 | 11.63 | 14.63 | 16.63 |
| Hinne B | min | 2.42 | 3.22 | 4.22 | 4.72 | 5.22 | 6.06 | 7.06 | 8.74 | 9.47 | 11.47 | 14.47 | 16.47 | |
| e | Hinne A | min | 3.41 | 4.32 | 5.45 | 6.01 | 6.58 | 7.66 | 8.79 | 11.05 | 12.12 | 14.38 | 17.77 | 20.03 |
| Hinne B | min | 3.28 | 4.18 | 5.31 | 5.88 | 6.44 | 7.5 | 8.63 | 10.89 | 11.94 | 14.2 | 17.59 | 19.85 | |
| L1 | max | 0.6 | 0.8 | 1 | 1 | 1 | 1.2 | 1.2 | 1.4 | 1.4 | 2 | 2 | 3 | |
| k | Nominaalsuurus | 1.1 | 1.4 | 1.7 | 2 | 2.4 | 2.8 | 3.5 | 4 | 4.8 | 5.3 | 6.4 | 7.5 | |
| Hinne A | max | 1.225 | 1.525 | 1.825 | 2.125 | 2.525 | 2.925 | 3.65 | 4.15 | 4.95 | 5.45 | 6.58 | 7.68 | |
| min | 0,975 | 1.275 | 1,575 | 1,875 | 2.275 | 2,675 | 3.35 | 3.85 | 4.65 | 5.15 | 6.22 | 7.32 | ||
| Hinne B | max | 1.3 | 1.6 | 1.9 | 2.2 | 2.6 | 3 | 3.74 | 4.24 | 5.04 | 5.54 | 6.69 | 7.79 | |
| min | 0.9 | 1.2 | 1.5 | 1.8 | 2.2 | 2.6 | 3.26 | 3.76 | 4.56 | 5.06 | 6.11 | 7.21 | ||
| k1 | Hinne A | min | 0,68 | 0,89 | 1.1 | 1.31 | 1.59 | 1.87 | 2.35 | 2.7 | 3.26 | 3.61 | 4.35 | 5.12 |
| Hinne B | min | 0,63 | 0,84 | 1.05 | 1.26 | 1.54 | 1.82 | 2.28 | 2.63 | 3.19 | 3.54 | 4.28 | 5.05 | |
| r | min | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.2 | 0.2 | 0,25 | 0,25 | 0.4 | 0.4 | 0.6 | |
| s | max = nimisuurus | 3.2 | 4 | 5 | 5.5 | 6 | 7 | 8 | 10 | 11 | 13 | 16 | 18 | |
| Hinne A | min | 3.02 | 3.82 | 4.82 | 5.32 | 5.82 | 6.78 | 7.78 | 9.78 | 10.73 | 12.73 | 15.73 | 17.73 | |
| Hinne B | min | 2.9 | 3.7 | 4.7 | 5.2 | 5.7 | 6.64 | 7.64 | 9.64 | 10.57 | 12.57 | 15.57 | 17.57 | |
| Keerme pikkus b | - | - | - | - | - | - | - | - | - | - | - | - | ||
| Kruvikeere | (M14) | M16 | (M18) | M20 | (M22) | M24 | (M27) | M30 | (M33) | M36 | (M39) | M42 | ||
| P | Pitch | 2 | 2 | 2.5 | 2.5 | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | |
| b | L≤125 | 34 | 38 | 42 | 46 | 50 | 54 | 60 | 66 | 72 | - | - | - | |
| 125＜L≤200 | 40 | 44 | 48 | 52 | 56 | 60 | 66 | 72 | 78 | 84 | 90 | 96 | ||
| L = 200 | 53 | 57 | 61 | 65 | 69 | 73 | 79 | 85 | 91 | 97 | 103 | 109 | ||
| c | max | 0.6 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 1 | 1 | |
| min | 0,15 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.3 | 0.3 | ||
| da | max | 15.7 | 17.7 | 20.2 | 22.4 | 24.4 | 26.4 | 30.4 | 33.4 | 36.4 | 39.4 | 42.4 | 45.6 | |
| ds | max = nimisuurus | 14 | 16 | 18 | 20 | 22 | 24 | 27 | 30 | 33 | 36 | 39 | 42 | |
| Hinne A | min | 13.73 | 15.73 | 17.73 | 19.67 | 21.67 | 23.67 | - | - | - | - | - | - | |
| Hinne B | min | 13.57 | 15.57 | 17.57 | 19.48 | 21.48 | 23.48 | 26.48 | 29.48 | 32.38 | 35.38 | 38.38 | 41.38 | |
| dw | Hinne A | min | 19.64 | 22.49 | 25.34 | 28.19 | 31.71 | 33.61 | - | - | - | - | - | - |
| Hinne B | min | 19.15 | 22 | 24.85 | 27.7 | 31.35 | 33.25 | 38 | 42,75 | 46,55 | 51.11 | 55,86 | 59,95 | |
| e | Hinne A | min | 23.36 | 26.75 | 30.14 | 33.53 | 37,72 | 39.98 | - | - | - | - | - | - |
| Hinne B | min | 22.78 | 26.17 | 29.56 | 32.95 | 37.29 | 39.55 | 45.2 | 50,85 | 55.37 | 60,79 | 66.44 | 71.3 | |
| L1 | max | 3 | 3 | 3 | 4 | 4 | 4 | 6 | 6 | 6 | 6 | 6 | 8 | |
| k | Nominaalsuurus | 8.8 | 10 | 11.5 | 12.5 | 14 | 15 | 17 | 18.7 | 21 | 22.5 | 25 | 26 | |
| Hinne A | max | 8.98 | 10.18 | 11.715 | 12.715 | 14.215 | 15.215 | - | - | - | - | - | - | |
| min | 8.62 | 9.82 | 11.285 | 12.285 | 13,785 | 14,785 | - | - | - | - | - | - | ||
| Hinne B | max | 9.09 | 10.29 | 11.85 | 12.85 | 14.35 | 15.35 | 17.35 | 19.12 | 21.42 | 22.92 | 25.42 | 26.42 | |
| min | 8.51 | 9.71 | 11.15 | 12.15 | 13.65 | 14.65 | 16.65 | 18.28 | 20.58 | 22.08 | 24.58 | 25.58 | ||
| k1 | Hinne A | min | 6.03 | 6.87 | 7.9 | 8.6 | 9.65 | 10.35 | - | - | - | - | - | - |
| Hinne B | min | 5.96 | 6.8 | 7.81 | 8.51 | 9.56 | 10.26 | 11.66 | 12.8 | 14.41 | 15.46 | 17.21 | 17.91 | |
| r | min | 0.6 | 0.6 | 0.6 | 0.8 | 0.8 | 0.8 | 1 | 1 | 1 | 1 | 1 | 1.2 | |
| s | max = nimisuurus | 21 | 24 | 27 | 30 | 34 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | |
| Hinne A | min | 20.67 | 23.67 | 26.67 | 29.67 | 33.38 | 35.38 | - | - | - | - | - | - | |
| Hinne B | min | 20.16 | 23.16 | 26.16 | 29.16 | 33 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | |
| Keerme pikkus b | - | - | - | - | - | - | - | - | - | - |
|
| ||
| Kruvikeere | (M45) | M48 | (M52) | M56 | (M60) | M64 |
|
|
|
|
|
| ||
| P | Pitch | 4.5 | 5 | 5 | 5.5 | 5.5 | 6 |
|
|
|
|
|
| |
| b | L≤125 | - | - | - | - | - | - |
|
|
|
|
|
| |
| 125＜L≤200 | 102 | 108 | 116 | - | - | - |
|
|
|
|
|
| ||
| L = 200 | 115 | 121 | 129 | 137 | 145 | 153 |
|
|
|
|
|
| ||
| c | max | 1 | 1 | 1 | 1 | 1 | 1 |
|
|
|
|
|
| |
| min | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 |
|
|
|
|
|
| ||
| da | max | 48.6 | 52.6 | 56.6 | 63 | 67 | 71 |
|
|
|
|
|
| |
| ds | max = nimisuurus | 45 | 48 | 52 | 56 | 60 | 64 |
|
|
|
|
|
| |
| Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
| |
| Hinne B | min | 44.38 | 47.38 | 51.26 | 55.26 | 59.26 | 63.26 |
|
|
|
|
|
| |
| dw | Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Hinne B | min | 64.7 | 69,45 | 74.2 | 78,66 | 83,41 | 88.16 |
|
|
|
|
|
| |
| e | Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Hinne B | min | 76,95 | 82.6 | 88,25 | 93,56 | 99.21 | 104,86 |
|
|
|
|
|
| |
| L1 | max | 8 | 10 | 10 | 12 | 12 | 13 |
|
|
|
|
|
| |
| k | Nominaalsuurus | 28 | 30 | 33 | 35 | 38 | 40 |
|
|
|
|
|
| |
| Hinne A | max | - | - | - | - | - | - |
|
|
|
|
|
| |
| min | - | - | - | - | - | - |
|
|
|
|
|
| ||
| Hinne B | max | 28.42 | 30.42 | 33.5 | 35.5 | 38.5 | 40.5 |
|
|
|
|
|
| |
| min | 27.58 | 29.58 | 32.5 | 34.5 | 37.5 | 39.5 |
|
|
|
|
|
| ||
| k1 | Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Hinne B | min | 19.31 | 20.71 | 22.75 | 24.15 | 26.25 | 27.65 |
|
|
|
|
|
| |
| r | min | 1.2 | 1.6 | 1.6 | 2 | 2 | 2 |
|
|
|
|
|
| |
| s | max = nimisuurus | 70 | 75 | 80 | 85 | 90 | 95 |
|
|
|
|
|
| |
| Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
| |
| Hinne B | min | 68.1 | 73.1 | 78.1 | 82,8 | 87,8 | 92,8 |
|
|
|
|
|
| |
| Keerme pikkus b | - | - | - | - | - | - |
|
|
|
|
| |||
Omadused ja eelised
Hex Bolt Din 931 / ISO4014 CL 8.8 on ülitugev kinnitusvahend, mis sobib hästi kasutamiseks erinevates rakendustes.Oma vastupidava konstruktsiooni ja usaldusväärse jõudlusega on see polt ideaalne kasutamiseks raskeveokite masinates, ehitusseadmetes ja muudes nõudlikes keskkondades, kus tugevus ja vastupidavus on olulised.
Kvaliteetsetest materjalidest valmistatud kuuskantpolt Din 931 / ISO4014 CL 8.8 on loodud taluma suuri koormusi, kõrget rõhku ja äärmuslikke temperatuure.Kuusnurkse peaga, mis võimaldab hõlpsat pingutamist ja lahtivõtmist, on seda polti lihtne paigaldada ja eemaldada – see teeb sellest mitmekülgse ja kulutõhusa valiku mitmesuguste rakenduste jaoks.
Lisaks oma tugevusele ja vastupidavusele on Hex Bolt Din 931 / ISO4014 CL 8.8 ka korrosioonikindel, tagades kauakestva jõudluse ka kõige karmimates keskkondades.Tänu suurele tõmbetugevusele ja korrosioonivastastele omadustele on see polt suurepärane valik kasutamiseks mere-, nafta- ja gaasikeskkonnas ning muudes söövitavates keskkondades.
Olenemata sellest, kas ehitate uut hoonet, remondite tööstusmasinaid või teostate oma seadmete korralist hooldust, kuuskantpolt Din 931 / ISO4014 CL 8.8 on selle töö jaoks ideaalne kinnitus.Oma suurepärase tugevuse, vastupidavuse ja korrosioonikindlusega tagab see polt usaldusväärse ja kauakestva jõudluse ka kõige keerulisemates töötingimustes.
Miks siis oodata?Olenemata sellest, kas olete professionaalne mehaanik või isetegemise entusiast, lisage kindlasti Hex Bolt Din 931 / ISO4014 CL 8.8 oma tööriistakasti juba täna ja kogege ise ülitugeva kinnituse eeliseid!
