Süsinikterasest konkspolt Tsingitud
| Toote nimi | HEX BOLT DIN 931/ISO4014 poolkeere |
| Standard | DIN,ASTM/ANSI JIS EN ISO,AS,GB |
| Hinne | Terase klass: DIN: Gr.4.6,4.8,5.6,5.8,8.8,10.9,12.9;SAE: Gr.2,5,8; ASTM: 307A,A325,A490, |
| Viimistlemine | Tsink (kollane, valge, sinine, must), humal tsingitud (HDG), must oksiid, Geomet, Dacroment, anodeerimine, nikeldatud, tsink-nikeldatud |
| Tootmisprotsess | M2-M24: külm konn, M24-M100 kuum sepistamine, Mehaaniline töötlemine ja CNC kohandatud kinnitusdetailide jaoks |
| Kohandatud toodete tarneaeg | 30-60 päeva, |
| Kruvikeere | M1.6 | M2 | M2.5 | M3 | (M3.5) | M4 | M5 | M6 | (M7) | M8 | M10 | M12 | ||
| P | Pitch | 0,35 | 0.4 | 0,45 | 0.5 | 0.6 | 0.7 | 0.8 | 1 | 1 | 1.25 | 1.5 | 1.75 | |
| b | L≤125 | 9 | 10 | 11 | 12 | 13 | 14 | 16 | 18 | 20 | 22 | 26 | 30 | |
| 125＜L≤200 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 26 | 28 | 32 | 36 | ||
| L = 200 | 28 | 29 | 30 | 31 | 32 | 33 | 35 | 37 | 39 | 41 | 45 | 49 | ||
| c | max | 0,25 | 0,25 | 0,25 | 0.4 | 0.4 | 0.4 | 0.5 | 0.5 | 0.6 | 0.6 | 0.6 | 0.6 | |
| min | 0.1 | 0.1 | 0.1 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | ||
| da | max | 2 | 2.6 | 3.1 | 3.6 | 4.1 | 4.7 | 5.7 | 6.8 | 7.8 | 9.2 | 11.2 | 13.7 | |
| ds | max = nimisuurus | 1.6 | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | 7 | 8 | 10 | 12 | |
| Hinne A | min | 1.46 | 1.86 | 2.36 | 2.86 | 3.32 | 3.82 | 4.82 | 5.82 | 6.78 | 7.78 | 9.78 | 11.73 | |
| Hinne B | min | 1.35 | 1.75 | 2.25 | 2.75 | 3.2 | 3.7 | 4.7 | 5.7 | 6.64 | 7.64 | 9.64 | 11.57 | |
| dw | Hinne A | min | 2.54 | 3.34 | 4.34 | 4.84 | 5.34 | 6.2 | 7.2 | 8.88 | 9.63 | 11.63 | 14.63 | 16.63 |
| Hinne B | min | 2.42 | 3.22 | 4.22 | 4.72 | 5.22 | 6.06 | 7.06 | 8.74 | 9.47 | 11.47 | 14.47 | 16.47 | |
| e | Hinne A | min | 3.41 | 4.32 | 5.45 | 6.01 | 6.58 | 7.66 | 8.79 | 11.05 | 12.12 | 14.38 | 17.77 | 20.03 |
| Hinne B | min | 3.28 | 4.18 | 5.31 | 5.88 | 6.44 | 7.5 | 8.63 | 10.89 | 11.94 | 14.2 | 17.59 | 19.85 | |
| L1 | max | 0.6 | 0.8 | 1 | 1 | 1 | 1.2 | 1.2 | 1.4 | 1.4 | 2 | 2 | 3 | |
| k | Nominaalsuurus | 1.1 | 1.4 | 1.7 | 2 | 2.4 | 2.8 | 3.5 | 4 | 4.8 | 5.3 | 6.4 | 7.5 | |
| Hinne A | max | 1.225 | 1.525 | 1.825 | 2.125 | 2.525 | 2.925 | 3.65 | 4.15 | 4.95 | 5.45 | 6.58 | 7.68 | |
| min | 0,975 | 1.275 | 1,575 | 1,875 | 2.275 | 2,675 | 3.35 | 3.85 | 4.65 | 5.15 | 6.22 | 7.32 | ||
| Hinne B | max | 1.3 | 1.6 | 1.9 | 2.2 | 2.6 | 3 | 3.74 | 4.24 | 5.04 | 5.54 | 6.69 | 7.79 | |
| min | 0.9 | 1.2 | 1.5 | 1.8 | 2.2 | 2.6 | 3.26 | 3.76 | 4.56 | 5.06 | 6.11 | 7.21 | ||
| k1 | Hinne A | min | 0,68 | 0,89 | 1.1 | 1.31 | 1.59 | 1.87 | 2.35 | 2.7 | 3.26 | 3.61 | 4.35 | 5.12 |
| Hinne B | min | 0,63 | 0,84 | 1.05 | 1.26 | 1.54 | 1.82 | 2.28 | 2.63 | 3.19 | 3.54 | 4.28 | 5.05 | |
| r | min | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.2 | 0.2 | 0,25 | 0,25 | 0.4 | 0.4 | 0.6 | |
| s | max = nimisuurus | 3.2 | 4 | 5 | 5.5 | 6 | 7 | 8 | 10 | 11 | 13 | 16 | 18 | |
| Hinne A | min | 3.02 | 3.82 | 4.82 | 5.32 | 5.82 | 6.78 | 7.78 | 9.78 | 10.73 | 12.73 | 15.73 | 17.73 | |
| Hinne B | min | 2.9 | 3.7 | 4.7 | 5.2 | 5.7 | 6.64 | 7.64 | 9.64 | 10.57 | 12.57 | 15.57 | 17.57 | |
| Keerme pikkus b | - | - | - | - | - | - | - | - | - | - | - | - | ||
| Kruvikeere | (M14) | M16 | (M18) | M20 | (M22) | M24 | (M27) | M30 | (M33) | M36 | (M39) | M42 | ||
| P | Pitch | 2 | 2 | 2.5 | 2.5 | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | |
| b | L≤125 | 34 | 38 | 42 | 46 | 50 | 54 | 60 | 66 | 72 | - | - | - | |
| 125＜L≤200 | 40 | 44 | 48 | 52 | 56 | 60 | 66 | 72 | 78 | 84 | 90 | 96 | ||
| L = 200 | 53 | 57 | 61 | 65 | 69 | 73 | 79 | 85 | 91 | 97 | 103 | 109 | ||
| c | max | 0.6 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 1 | 1 | |
| min | 0,15 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.3 | 0.3 | ||
| da | max | 15.7 | 17.7 | 20.2 | 22.4 | 24.4 | 26.4 | 30.4 | 33.4 | 36.4 | 39.4 | 42.4 | 45.6 | |
| ds | max = nimisuurus | 14 | 16 | 18 | 20 | 22 | 24 | 27 | 30 | 33 | 36 | 39 | 42 | |
| Hinne A | min | 13.73 | 15.73 | 17.73 | 19.67 | 21.67 | 23.67 | - | - | - | - | - | - | |
| Hinne B | min | 13.57 | 15.57 | 17.57 | 19.48 | 21.48 | 23.48 | 26.48 | 29.48 | 32.38 | 35.38 | 38.38 | 41.38 | |
| dw | Hinne A | min | 19.64 | 22.49 | 25.34 | 28.19 | 31.71 | 33.61 | - | - | - | - | - | - |
| Hinne B | min | 19.15 | 22 | 24.85 | 27.7 | 31.35 | 33.25 | 38 | 42,75 | 46,55 | 51.11 | 55,86 | 59,95 | |
| e | Hinne A | min | 23.36 | 26.75 | 30.14 | 33.53 | 37,72 | 39.98 | - | - | - | - | - | - |
| Hinne B | min | 22.78 | 26.17 | 29.56 | 32.95 | 37.29 | 39.55 | 45.2 | 50,85 | 55.37 | 60,79 | 66.44 | 71.3 | |
| L1 | max | 3 | 3 | 3 | 4 | 4 | 4 | 6 | 6 | 6 | 6 | 6 | 8 | |
| k | Nominaalsuurus | 8.8 | 10 | 11.5 | 12.5 | 14 | 15 | 17 | 18.7 | 21 | 22.5 | 25 | 26 | |
| Hinne A | max | 8.98 | 10.18 | 11.715 | 12.715 | 14.215 | 15.215 | - | - | - | - | - | - | |
| min | 8.62 | 9.82 | 11.285 | 12.285 | 13,785 | 14,785 | - | - | - | - | - | - | ||
| Hinne B | max | 9.09 | 10.29 | 11.85 | 12.85 | 14.35 | 15.35 | 17.35 | 19.12 | 21.42 | 22.92 | 25.42 | 26.42 | |
| min | 8.51 | 9.71 | 11.15 | 12.15 | 13.65 | 14.65 | 16.65 | 18.28 | 20.58 | 22.08 | 24.58 | 25.58 | ||
| k1 | Hinne A | min | 6.03 | 6.87 | 7.9 | 8.6 | 9.65 | 10.35 | - | - | - | - | - | - |
| Hinne B | min | 5.96 | 6.8 | 7.81 | 8.51 | 9.56 | 10.26 | 11.66 | 12.8 | 14.41 | 15.46 | 17.21 | 17.91 | |
| r | min | 0.6 | 0.6 | 0.6 | 0.8 | 0.8 | 0.8 | 1 | 1 | 1 | 1 | 1 | 1.2 | |
| s | max = nimisuurus | 21 | 24 | 27 | 30 | 34 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | |
| Hinne A | min | 20.67 | 23.67 | 26.67 | 29.67 | 33.38 | 35.38 | - | - | - | - | - | - | |
| Hinne B | min | 20.16 | 23.16 | 26.16 | 29.16 | 33 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | |
| Keerme pikkus b | - | - | - | - | - | - | - | - | - | - |
|
| ||
| Kruvikeere | (M45) | M48 | (M52) | M56 | (M60) | M64 |
|
|
|
|
|
| ||
| P | Pitch | 4.5 | 5 | 5 | 5.5 | 5.5 | 6 |
|
|
|
|
|
| |
| b | L≤125 | - | - | - | - | - | - |
|
|
|
|
|
| |
| 125＜L≤200 | 102 | 108 | 116 | - | - | - |
|
|
|
|
|
| ||
| L = 200 | 115 | 121 | 129 | 137 | 145 | 153 |
|
|
|
|
|
| ||
| c | max | 1 | 1 | 1 | 1 | 1 | 1 |
|
|
|
|
|
| |
| min | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 |
|
|
|
|
|
| ||
| da | max | 48.6 | 52.6 | 56.6 | 63 | 67 | 71 |
|
|
|
|
|
| |
| ds | max = nimisuurus | 45 | 48 | 52 | 56 | 60 | 64 |
|
|
|
|
|
| |
| Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
| |
| Hinne B | min | 44.38 | 47.38 | 51.26 | 55.26 | 59.26 | 63.26 |
|
|
|
|
|
| |
| dw | Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Hinne B | min | 64.7 | 69,45 | 74.2 | 78,66 | 83,41 | 88.16 |
|
|
|
|
|
| |
| e | Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Hinne B | min | 76,95 | 82.6 | 88,25 | 93,56 | 99.21 | 104,86 |
|
|
|
|
|
| |
| L1 | max | 8 | 10 | 10 | 12 | 12 | 13 |
|
|
|
|
|
| |
| k | Nominaalsuurus | 28 | 30 | 33 | 35 | 38 | 40 |
|
|
|
|
|
| |
| Hinne A | max | - | - | - | - | - | - |
|
|
|
|
|
| |
| min | - | - | - | - | - | - |
|
|
|
|
|
| ||
| Hinne B | max | 28.42 | 30.42 | 33.5 | 35.5 | 38.5 | 40.5 |
|
|
|
|
|
| |
| min | 27.58 | 29.58 | 32.5 | 34.5 | 37.5 | 39.5 |
|
|
|
|
|
| ||
| k1 | Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Hinne B | min | 19.31 | 20.71 | 22.75 | 24.15 | 26.25 | 27.65 |
|
|
|
|
|
| |
| r | min | 1.2 | 1.6 | 1.6 | 2 | 2 | 2 |
|
|
|
|
|
| |
| s | max = nimisuurus | 70 | 75 | 80 | 85 | 90 | 95 |
|
|
|
|
|
| |
| Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
| |
| Hinne B | min | 68.1 | 73.1 | 78.1 | 82,8 | 87,8 | 92,8 |
|
|
|
|
|
| |
| Keerme pikkus b | - | - | - | - | - | - |
|
|
|
|
| |||
Omadused ja eelised
Hook Bolt Zinc Plated on kvaliteetne kinnitusvahend, mida kasutatakse erinevateks rakendusteks.Polt on valmistatud vastupidavast ja ülitugevast terasest, mis on rooste ja korrosiooni vältimiseks kaetud tsingiga.Poldil on konksukujuline ots, mis sobib ideaalselt esemete kinnitamiseks või kergete esemete riputamiseks.
Hook Bolt Zinc Plated on mitmekülgne polt, mis sobib kasutamiseks nii sise- kui ka välistingimustes.Selle tsinkimine hoiab ära poldi roostetamise või korrodeerumise, muutes selle vastupidavaks karmile ilmastikule ja söövitavale keskkonnale.See sobib ideaalselt kasutamiseks ehituses, isetegemise projektides ja muudes tööstuslikes rakendustes, kus poldi tugevus ja vastupidavus on üliolulised.
Tsingitud poldi konksukujulise otsa ainulaadne disain muudab poldi paigaldamise ja kasutamise lihtsaks.Seda saab pingevabalt pinda kruvida ja konksukujuline ots saab hõlpsasti eseme külge haarata või kerge eseme riputada, ilma et oleks vaja täiendavat riistvara.Lisaks annab poldi tsinkplaat esteetiliselt meeldiva välimuse, muutes selle suurepäraseks valikuks dekoratiivrakendustes.
Kokkuvõtteks võib öelda, et Hook Bolt Zinc Plated on tugev, mitmekülgne ja hõlpsasti kasutatav polt, mis sobib ideaalselt erinevateks rakendusteks.Selle tsinkimine suurendab selle vastupidavust, muutes selle suurepäraseks valikuks välitingimustes või söövitavas keskkonnas.Poldi ainulaadne konksukujuline ots muudab selle paigaldamise ja kasutamise lihtsaks ning selle mitmekülgsus muudab selle ideaalseks valikuks nii tööstuslikeks kui dekoratiivseteks rakendusteks.Tsingitud konkspolt juba täna, et saada tõhusat ja vastupidavat kinnitusvahendit.
