Süsinikterasest tiibmutrid / liblikmutrid Din 315
| Toote nimi | HEX BOLT DIN 931/ISO4014 poolkeere |
| Standard | DIN,ASTM/ANSI JIS EN ISO,AS,GB |
| Hinne | Terase klass: DIN: Gr.4.6,4.8,5.6,5.8,8.8,10.9,12.9;SAE: Gr.2,5,8; ASTM: 307A,A325,A490, |
| Viimistlemine | Tsink (kollane, valge, sinine, must), humal tsingitud (HDG), must oksiid, Geomet, Dacroment, anodeerimine, nikeldatud, tsink-nikeldatud |
| Tootmisprotsess | M2-M24: külm konn, M24-M100 kuum sepistamine, Mehaaniline töötlemine ja CNC kohandatud kinnitusdetailide jaoks |
| Kohandatud toodete tarneaeg | 30-60 päeva, |
| Kruvikeere | M1.6 | M2 | M2.5 | M3 | (M3.5) | M4 | M5 | M6 | (M7) | M8 | M10 | M12 | ||
| P | Pitch | 0,35 | 0.4 | 0,45 | 0.5 | 0.6 | 0.7 | 0.8 | 1 | 1 | 1.25 | 1.5 | 1.75 | |
| b | L≤125 | 9 | 10 | 11 | 12 | 13 | 14 | 16 | 18 | 20 | 22 | 26 | 30 | |
| 125＜L≤200 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 26 | 28 | 32 | 36 | ||
| L = 200 | 28 | 29 | 30 | 31 | 32 | 33 | 35 | 37 | 39 | 41 | 45 | 49 | ||
| c | max | 0,25 | 0,25 | 0,25 | 0.4 | 0.4 | 0.4 | 0.5 | 0.5 | 0.6 | 0.6 | 0.6 | 0.6 | |
| min | 0.1 | 0.1 | 0.1 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | 0,15 | ||
| da | max | 2 | 2.6 | 3.1 | 3.6 | 4.1 | 4.7 | 5.7 | 6.8 | 7.8 | 9.2 | 11.2 | 13.7 | |
| ds | max = nimisuurus | 1.6 | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | 7 | 8 | 10 | 12 | |
| Hinne A | min | 1.46 | 1.86 | 2.36 | 2.86 | 3.32 | 3.82 | 4.82 | 5.82 | 6.78 | 7.78 | 9.78 | 11.73 | |
| Hinne B | min | 1.35 | 1.75 | 2.25 | 2.75 | 3.2 | 3.7 | 4.7 | 5.7 | 6.64 | 7.64 | 9.64 | 11.57 | |
| dw | Hinne A | min | 2.54 | 3.34 | 4.34 | 4.84 | 5.34 | 6.2 | 7.2 | 8.88 | 9.63 | 11.63 | 14.63 | 16.63 |
| Hinne B | min | 2.42 | 3.22 | 4.22 | 4.72 | 5.22 | 6.06 | 7.06 | 8.74 | 9.47 | 11.47 | 14.47 | 16.47 | |
| e | Hinne A | min | 3.41 | 4.32 | 5.45 | 6.01 | 6.58 | 7.66 | 8.79 | 11.05 | 12.12 | 14.38 | 17.77 | 20.03 |
| Hinne B | min | 3.28 | 4.18 | 5.31 | 5.88 | 6.44 | 7.5 | 8.63 | 10.89 | 11.94 | 14.2 | 17.59 | 19.85 | |
| L1 | max | 0.6 | 0.8 | 1 | 1 | 1 | 1.2 | 1.2 | 1.4 | 1.4 | 2 | 2 | 3 | |
| k | Nominaalsuurus | 1.1 | 1.4 | 1.7 | 2 | 2.4 | 2.8 | 3.5 | 4 | 4.8 | 5.3 | 6.4 | 7.5 | |
| Hinne A | max | 1.225 | 1.525 | 1.825 | 2.125 | 2.525 | 2.925 | 3.65 | 4.15 | 4.95 | 5.45 | 6.58 | 7.68 | |
| min | 0,975 | 1.275 | 1,575 | 1,875 | 2.275 | 2,675 | 3.35 | 3.85 | 4.65 | 5.15 | 6.22 | 7.32 | ||
| Hinne B | max | 1.3 | 1.6 | 1.9 | 2.2 | 2.6 | 3 | 3.74 | 4.24 | 5.04 | 5.54 | 6.69 | 7.79 | |
| min | 0.9 | 1.2 | 1.5 | 1.8 | 2.2 | 2.6 | 3.26 | 3.76 | 4.56 | 5.06 | 6.11 | 7.21 | ||
| k1 | Hinne A | min | 0,68 | 0,89 | 1.1 | 1.31 | 1.59 | 1.87 | 2.35 | 2.7 | 3.26 | 3.61 | 4.35 | 5.12 |
| Hinne B | min | 0,63 | 0,84 | 1.05 | 1.26 | 1.54 | 1.82 | 2.28 | 2.63 | 3.19 | 3.54 | 4.28 | 5.05 | |
| r | min | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.2 | 0.2 | 0,25 | 0,25 | 0.4 | 0.4 | 0.6 | |
| s | max = nimisuurus | 3.2 | 4 | 5 | 5.5 | 6 | 7 | 8 | 10 | 11 | 13 | 16 | 18 | |
| Hinne A | min | 3.02 | 3.82 | 4.82 | 5.32 | 5.82 | 6.78 | 7.78 | 9.78 | 10.73 | 12.73 | 15.73 | 17.73 | |
| Hinne B | min | 2.9 | 3.7 | 4.7 | 5.2 | 5.7 | 6.64 | 7.64 | 9.64 | 10.57 | 12.57 | 15.57 | 17.57 | |
| Keerme pikkus b | - | - | - | - | - | - | - | - | - | - | - | - | ||
| Kruvikeere | (M14) | M16 | (M18) | M20 | (M22) | M24 | (M27) | M30 | (M33) | M36 | (M39) | M42 | ||
| P | Pitch | 2 | 2 | 2.5 | 2.5 | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | |
| b | L≤125 | 34 | 38 | 42 | 46 | 50 | 54 | 60 | 66 | 72 | - | - | - | |
| 125＜L≤200 | 40 | 44 | 48 | 52 | 56 | 60 | 66 | 72 | 78 | 84 | 90 | 96 | ||
| L = 200 | 53 | 57 | 61 | 65 | 69 | 73 | 79 | 85 | 91 | 97 | 103 | 109 | ||
| c | max | 0.6 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 1 | 1 | |
| min | 0,15 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.3 | 0.3 | ||
| da | max | 15.7 | 17.7 | 20.2 | 22.4 | 24.4 | 26.4 | 30.4 | 33.4 | 36.4 | 39.4 | 42.4 | 45.6 | |
| ds | max = nimisuurus | 14 | 16 | 18 | 20 | 22 | 24 | 27 | 30 | 33 | 36 | 39 | 42 | |
| Hinne A | min | 13.73 | 15.73 | 17.73 | 19.67 | 21.67 | 23.67 | - | - | - | - | - | - | |
| Hinne B | min | 13.57 | 15.57 | 17.57 | 19.48 | 21.48 | 23.48 | 26.48 | 29.48 | 32.38 | 35.38 | 38.38 | 41.38 | |
| dw | Hinne A | min | 19.64 | 22.49 | 25.34 | 28.19 | 31.71 | 33.61 | - | - | - | - | - | - |
| Hinne B | min | 19.15 | 22 | 24.85 | 27.7 | 31.35 | 33.25 | 38 | 42,75 | 46,55 | 51.11 | 55,86 | 59,95 | |
| e | Hinne A | min | 23.36 | 26.75 | 30.14 | 33.53 | 37,72 | 39.98 | - | - | - | - | - | - |
| Hinne B | min | 22.78 | 26.17 | 29.56 | 32.95 | 37.29 | 39.55 | 45.2 | 50,85 | 55.37 | 60,79 | 66.44 | 71.3 | |
| L1 | max | 3 | 3 | 3 | 4 | 4 | 4 | 6 | 6 | 6 | 6 | 6 | 8 | |
| k | Nominaalsuurus | 8.8 | 10 | 11.5 | 12.5 | 14 | 15 | 17 | 18.7 | 21 | 22.5 | 25 | 26 | |
| Hinne A | max | 8.98 | 10.18 | 11.715 | 12.715 | 14.215 | 15.215 | - | - | - | - | - | - | |
| min | 8.62 | 9.82 | 11.285 | 12.285 | 13,785 | 14,785 | - | - | - | - | - | - | ||
| Hinne B | max | 9.09 | 10.29 | 11.85 | 12.85 | 14.35 | 15.35 | 17.35 | 19.12 | 21.42 | 22.92 | 25.42 | 26.42 | |
| min | 8.51 | 9.71 | 11.15 | 12.15 | 13.65 | 14.65 | 16.65 | 18.28 | 20.58 | 22.08 | 24.58 | 25.58 | ||
| k1 | Hinne A | min | 6.03 | 6.87 | 7.9 | 8.6 | 9.65 | 10.35 | - | - | - | - | - | - |
| Hinne B | min | 5.96 | 6.8 | 7.81 | 8.51 | 9.56 | 10.26 | 11.66 | 12.8 | 14.41 | 15.46 | 17.21 | 17.91 | |
| r | min | 0.6 | 0.6 | 0.6 | 0.8 | 0.8 | 0.8 | 1 | 1 | 1 | 1 | 1 | 1.2 | |
| s | max = nimisuurus | 21 | 24 | 27 | 30 | 34 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | |
| Hinne A | min | 20.67 | 23.67 | 26.67 | 29.67 | 33.38 | 35.38 | - | - | - | - | - | - | |
| Hinne B | min | 20.16 | 23.16 | 26.16 | 29.16 | 33 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | |
| Keerme pikkus b | - | - | - | - | - | - | - | - | - | - |
|
| ||
| Kruvikeere | (M45) | M48 | (M52) | M56 | (M60) | M64 |
|
|
|
|
|
| ||
| P | Pitch | 4.5 | 5 | 5 | 5.5 | 5.5 | 6 |
|
|
|
|
|
| |
| b | L≤125 | - | - | - | - | - | - |
|
|
|
|
|
| |
| 125＜L≤200 | 102 | 108 | 116 | - | - | - |
|
|
|
|
|
| ||
| L = 200 | 115 | 121 | 129 | 137 | 145 | 153 |
|
|
|
|
|
| ||
| c | max | 1 | 1 | 1 | 1 | 1 | 1 |
|
|
|
|
|
| |
| min | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 |
|
|
|
|
|
| ||
| da | max | 48.6 | 52.6 | 56.6 | 63 | 67 | 71 |
|
|
|
|
|
| |
| ds | max = nimisuurus | 45 | 48 | 52 | 56 | 60 | 64 |
|
|
|
|
|
| |
| Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
| |
| Hinne B | min | 44.38 | 47.38 | 51.26 | 55.26 | 59.26 | 63.26 |
|
|
|
|
|
| |
| dw | Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Hinne B | min | 64.7 | 69,45 | 74.2 | 78,66 | 83,41 | 88.16 |
|
|
|
|
|
| |
| e | Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Hinne B | min | 76,95 | 82.6 | 88,25 | 93,56 | 99.21 | 104,86 |
|
|
|
|
|
| |
| L1 | max | 8 | 10 | 10 | 12 | 12 | 13 |
|
|
|
|
|
| |
| k | Nominaalsuurus | 28 | 30 | 33 | 35 | 38 | 40 |
|
|
|
|
|
| |
| Hinne A | max | - | - | - | - | - | - |
|
|
|
|
|
| |
| min | - | - | - | - | - | - |
|
|
|
|
|
| ||
| Hinne B | max | 28.42 | 30.42 | 33.5 | 35.5 | 38.5 | 40.5 |
|
|
|
|
|
| |
| min | 27.58 | 29.58 | 32.5 | 34.5 | 37.5 | 39.5 |
|
|
|
|
|
| ||
| k1 | Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Hinne B | min | 19.31 | 20.71 | 22.75 | 24.15 | 26.25 | 27.65 |
|
|
|
|
|
| |
| r | min | 1.2 | 1.6 | 1.6 | 2 | 2 | 2 |
|
|
|
|
|
| |
| s | max = nimisuurus | 70 | 75 | 80 | 85 | 90 | 95 |
|
|
|
|
|
| |
| Hinne A | min | - | - | - | - | - | - |
|
|
|
|
|
| |
| Hinne B | min | 68.1 | 73.1 | 78.1 | 82,8 | 87,8 | 92,8 |
|
|
|
|
|
| |
| Keerme pikkus b | - | - | - | - | - | - |
|
|
|
|
| |||
Omadused ja eelised
Tiibmutter Din 315 on tiibmutri tüüp, mida kasutatakse laialdaselt kinnitustööstuses.Sellel mutril on paar tiibu, mis ulatuvad selle välispinnast välja, mistõttu on seda lihtne käsitsi haarata ja pingutada.Selle disain võimaldab kiiret paigaldamist ja eemaldamist, ilma et oleks vaja mingeid tööriistu.
Kvaliteetsest roostevabast terasest valmistatud tiibmutter Din 315 on rooste- ja korrosioonikindel, muutes selle väga vastupidavaks ja kauakestvaks.Lisaks on see väga kulumiskindel, mistõttu sobib see kasutamiseks karmides ja nõudlikes keskkondades.
Tiibmutter Din 315 on loodud sobima mitmesuguste rakendustega, sealhulgas masina-, ehitus- ja autotööstuses.Seda on lihtne kasutada ja reguleerida, mistõttu on see ideaalne paljude rakenduste jaoks, kus on vaja sagedast reguleerimist.Selle disain muudab selle hõlpsaks tuvastamise ja asukoha leidmise, säästes nii aega ja vaeva paigaldamise ja hoolduse ajal.
Üldiselt on tiibmutter Din 315 usaldusväärne ja tõhus kinnitus, mis sobib ideaalselt mitmesugusteks rakendusteks.Selle funktsionaalsus, vastupidavus ja kasutusmugavus muudavad selle väärtuslikuks lisandiks igale tööriistakomplektile.Olenemata sellest, kas töötate ehitus-, auto- või tööstussektoris, on tiibmutter Din 315 suurepärane valik kõigi teie kinnitusvajaduste jaoks.
